Продукти за amsoil 75w90 gl4 (5)

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

L’olio motore Xtreme LONG TRUCK 15W40 è un lubrificante per motori multigrado SHPDO (Super High Performance Diesel Oil) di ultima generazione realizzato con materie prime accuratamente selezionate e formulato per garantire eccezionali prestazioni nei moderni motori a gasolio di automezzi pesanti, aspirati e turbocompressi operanti anche in condizioni gravose. Il lubrificante per motori è pienamente compatibile con tutti i dispositivi di controllo delle emissioni inquinanti e supera gli standard prestazionali richiesti dai principali costruttori. Specifiche: DTFR 15B110 (MB 228.3) - VOLVO VDS-3 - MAN M3275 - MTU TYPE 2 - MACK EO-N - EO-M PLUS - RENAULT TRUCKS RLD/RLD-2 - CUMMINS CES 20076/77/78 - ECF-2/ ECF-1-A - DEUTZ DQC III-18 - GLOBAL DHD-1 - DETROIT DIESEL DDC 93K215

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Xtreme 8003 C3 ECO SYNT 5W40 è un lubrificante sintetico per auto di ultima generazione, la sua formulazione e l’utilizzo di materie prime accuratamente selezionate ne garantiscono eccezionali prestazioni nei moderni motori a benzina e gasolio, aspirati e turbocompressi operanti anche in condizioni gravose. Il lubrificante per motori Xtreme 8003 ECO SYNT 5W40 è pienamente compatibile con tutti i dispositivi di controllo delle emissioni inquinanti (p.es. DPF – Diesel Particulate Filter) e supera gli standard prestazionali richiesti dalle principali case costruttrici di autoveicoli. Specifiche: MB-APPROVAL 229.51 - VW 502.00/505.00/505.01 - BMW LL 04

Xtreme LONG TRUCK 15W-40 PLUS è un lubrificante multigrado di qualità premium progettato per motori diesel, che aiuta a prolungare la vita del motore nelle applicazioni in condizione di esercizio gravoso, offrendo allo stesso tempo prestazioni eccezionali nei moderni motori ad alta potenza e basse emissioni, compresi quelli con ricircolo dei gas di scarico (EGR) e sistemi di post-trattamento con filtri antiparticolato diesel (DPF) e catalizzatori di ossidazione diesel (DOC). SPECIFICHE: API SN/CK-4 - ACEA E7/E11-22 - MB 228.31 - MAN M3775 approval - VOLVO VDS 4.5 - RENAULT RLD-4/RLD-3 - MACK EOS-4.5 - MTU TYPE 2.1 - CATERPILLAR ECF-3 - DEUTZ DQC III-18LA - DETROIT DIESEL DFS 93K222 - CUMMINS CES 20086 - JASO DH2 - FORD 171-F1 - ALLISON TES 439